Acta Scientific Agriculture (ASAG)(ISSN: 2581-365X)

Research Article Volume 4 Issue 1

Impacts of Mechanization and Improved Seed Adoption in Maize Production in Earthquake Affected Areas of Sindhupalchok, Nepal

Chiranjibi Shrestha*

Department of Agriculture, Nepal

*Corresponding Author: Chiranjibi Shrestha, Department of Agriculture, Nepal.

Received: December 04, 2019; Published: December 27, 2019

×

Abstract

  The April 25, 2015 earthquake (with 7.6 Richter scale) and its subsequent aftershocks have had both direct and indirect impact on people’s agriculture and livelihoods. Machine users after earthquake were increased in this territory. Machineries reduce the working load and human drudgery. Farmers are facing increased price of cost of inputs like organic fertilizers, seeds along with labor charge for weeding, sowing and harvesting because of poor adoption of mechanization. Farm mechanization refers to application of engineering and technology in farm to perform farm works in better and precise way and increase productivity of farm and reduce the cost of production. Hence the drastic need to improve living standard of farmers through the adoption and adaptation of improved agricultural technologies. The maize zone, Sindhupalchok areas under PMAMP program was selected for this study. The total 120 households of the three municipalities were select by using purposive and simple random sampling technique. The secondary data were collected from reports from DADO office, SQCC, MoAD and CBS. The primary data were collected from household survey from pre-tested semi structured questionnaire and Focus Group Discussion (FGD). The collected data analyzed by using Microsoft Excel, SPSS software and Stata. Descriptive statistics, benefit cost ratio, mean t-test, chi square test, etc. were computed and compared between machine user and bullock user. Probit regression model was used to analyze factors affecting mini-tiller adoption. Machine users included only the mini-tiller users for land preparation that means in hilly areas of Sindhupalchok mechanization is in transformation phase. Social status of both machine users and bullock users were found comparable with age and ethnicity had negative and positive significant difference respectively. Most of the farmers purchased machine with subsidies from district agriculture development office (DADO), Sindhupalchok. but farmers can’t afford machineries directly from machineries supplier/dealer due to the high price of machineries. The average yield of maize was found to be 2.17 MT/ha in the study area from respondants response. Most of the mini-tiller users plow land two times and bullock users plow land three times. Both the users were in loss i.e. machine user’s loss NRs.15311 and bollock user’s loss NRs. 43125 in maize production in one hectare land with the B:C ratio of 0.88 and 0.63 respectively but farmers perceived their practice to be in profit as they did not consider the monetary value of two major cost of production, FYM cost and labor cost. Most of the farmer’s perception, working load and human drudgery was decreased by 50 percent. This research revealed that insect pest was ranked first problems in machine user farmers and agri-mechanization was the first ranked problems in bullock user farmers in the study area.

Keywords: Machine; Bullock; Mini-Tiller; Maize; Seed

×

References

  1. AICC. Agriculture Information and Communication Centre. Harihar Bhawan, Lalitpur, Nepal: Government of Nepal (2019).
  2. MOF. Economic Survey 2017/18. Kathmandu, Nepal: Government of Nepal (2018).
  3. DADO. Annual Agriculture Development and Statistics report. Chautara, Sindhupalchok: Nepal Government (2016/17).
  4. CBS. Annual household survey 2016/17. Kathmandu, Nepal: Government of Nepal, National Planning Commission (2017).
  5. MoAD. Statistical information of Nepalese agriculture. Singhdarawar. kathmandu. Nepal: Ministry of agriculture (2017).
  6. Timsina KP., et al. “Maize production in mid hills of Nepal: from food to feed security. Khumaltar, Lalitpur, Nepal”. Journal of Maize Research and Development (2016).
  7. KC G., et al. “Status and prospects of maize”. Journal of Maize Research and Development 1 (2015): 1-9.
  8. Gautam D and Shrestha S. Agricultural and Rural Mechanisation in. Institute for Inclusive Finance and Development (InM) (2017): 100.
  9. Gauchan D., et al. “Impact of 2015 Earthquake on Economy, Agriculture and Agrobiodiversity in Nepal”. Rebuilding Local Seed System of Native Crops in Earthquake Affected Areas of Nepal. Kathmandu: Devendra Gauchan (2017).
  10. Dhakal SC., et al. “Productivity and profitability of maize-pumpkin mix cropping in Chitwan, Nepal”. Journal of Maize Research and Development (2015): 112-122.
  11. Gittenger and Jehanzeb. “Benefit cost analysis of the maize crop under mechanized and traditional farming system. Peshawar, Pakistan”. Sarhad Journal of Agriculture 23 (2007).
  12. Posadas BC. Socioeconomic determinants of the level of mechanization of nurseries and greenhouses in the southern United States. Mexico: Office of Agricultural Communications, Division of Agriculture, Forestry, and Veterinary Medicine, Mississippi State University (2018).
  13. Li W., et al. “Study on Factors Affecting the Agricultural Mechanization Level in China Based on Structural Equation Modeling”. 11 (2018): 1-16.
  14. USDA. Census of Agriculture. United States: United States of Department of Agriculture (2017).
×

Citation

Citation: Chiranjibi Shrestha. “Impacts of Mechanization and Improved Seed Adoption in Maize Production in Earthquake Affected Areas of Sindhupalchok, Nepal".Acta Scientific Agriculture 4.1 (2020): 128-135.



Member In



News and Events


  • Certification for Review
    Acta Scientific certifies the Editors/reviewers for their review done towards the assigned articles of the respective journals.
  • Submission Timeline for March Issue
    The last date for submission of articles for regular Issues is February 29, 2020.
  • Publication Certificate
    Authors will be issued a "Publication Certificate" as a mark of appreciation for publishing their work.
  • Best Article of the Issue
    The Editors will elect one Best Article after each issue release. The authors of this article will be provided with a certificate of “Best Article of the Issue”.
  • Welcoming Article Submission
    Acta Scientific delightfully welcomes active researchers for submission of articles towards the upcoming issue of respective journals.
  • Contact US